IPOE-E302 Industrial IP67 1-Port 802.3bt PoE++ to 2-Port 802.3at/bt PoE++ Extender
The PLANET IPOE-E302 is an industrial IP67 Rated outdoor 1-port 802.3bt PoE++ to 2-port 802.3bt/at Gigabit PoE Extender is designed for point to multipoint (P2MP/PTMP) PoE applications. The IPOE-E302 can obtain a maximum of 95-watt PoE power in from 802.3bt PoE++ or PoH input port and supplies a maximum of 65-watt PoE power budget for 2 x PoE output ports, extending both the Gigabit Ethernet Data and 802.3at Power over Ethernet over the UTP cable. The IPOE-E302 provides a simple solution for adding PoE ports without running additional cabling and achieves more flexible network applications without requiring external power sources.
Weather-proof RJ45 Ethernet Connector and Shielded Plug
The IPOE-E302 is ideal for installing an extended range of outdoor PoE devices such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor PoE IP intercoms and much more. The IPOE-E302 is equipped with 3-port 10/100/1000BASE-T auto-negotiation RJ45 connectors and 3 waterproof cable glands for direct-attach applications. Assembled with a waterproof cable gland, it can make the general RJ45 connector weather-proof and provides tight and strong connection, and ensures it comes with the industrial protection rating of IP67 capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold.
Environmentally-Hardened Design
With industrial-level IP67-rated aluminum case, the IPOE-E302 provides a high level of immunity against electromagnetic interference, and is able to protect itself from dust and water ingress and to operate under the temperature range from -40 to +75 degrees C. All these features ensure the highest level of reliability for mission-critical applications in any challenging operating environment.
Plug and Play, and Easy Cabling Installation
The IPOE-E302 is quite easy to be installed by simply Plug and Play. It is used between a power source equipment (PSE) such as a PoE Switch or Injector and a powered device (PD) such as an Wireless Access Point or IP Camera.
The IPOE-E302 is designed in a compact box containing three RJ45 ports, of which one "PoE++ In" port functions as PD input and the other two "PoE++ Out" ports on the other side function as PSE output. The "PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously to a remote PD without affecting the data transmission performance. It offers a cost-effective and quick solution to double the standard range of PoE from 100 to 200 meters.
Physical Port
- Three 10/100/1000BASE-T Gigabit RJ45 ports:
- 1-Port Data + Power Input
- 2-Port Data + Power Output
Power over Ethernet
- 1-Port Data + Power Input
- Complies with IEEE 802.3bt PoE++ Type 4 standard PD
- Compatible with PoH (Power over HDBASE-T) protocol
- Backward compatible with IEEE 802.3at PoE+ end-span or mid-span PD
- Supports PoE input power up to 95 watts
- 2-Port Data + Power Output
- Complies with IEEE 802.3bt Power over Ethernet Plus Plus Type 3 PSE standard
- Up to 2 IEEE 802.3at/802.3bt PoE devices powered
- Supports total PoE budget up to 65 watts for 2 PoE output ports
- Auto detects powered device (PD)
- Extends the range of PoE to an additional 100 meters (328ft.)
- Forwards both Ethernet data and PoE power to remote device
Layer 2 Features
- Hardware-based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/MDI-X
- Features Store-and-Forward mode with wire-speed filtering and forwarding rates
- IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
- Integrates address look-up engine, supporting 2K absolute MAC addresses
- 9K jumbo frame support in 1000Mbps duplex mode
- Automatic address learning and address aging
Industrial Case and Installation
- IP67-rated aluminum case
- Wall-mount design
- Supports 6KV DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- No external power cable required for installation
- Plug and Play installation
Hardware Specifications
Network Connector
PoE in Port
- 1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++ “Data + DC” in
- Auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE out Port
- 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/bt PoE++ “Data + DC” out
- Auto MDI/MDI-X, auto-negotiation RJ45 connector
Switch Architecture
Store-and-Forward switch architecture
MAC Address Table
2K MAC address table with auto learning function
Data Buffer
1Mbit
Switch Fabric
6Gbps
Switch Throughput
4.46Mpps @ 64Bytes
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame
9Kbytes
ESD Protection
Air 8KV DC
Contact 6KV DC
Surge Protection
6KV
Enclosure
IP67-rated and IK10 aluminum case
Installation
Wall-mount ear
LED Display
Link/ACT LED x 3
Dimensions (W x D x H)
15 x 4.5cm x 7.4 cm
17 x 4.5 x 72.4 cm with cable gland
Weight
339g
372g (with three waterproof cable glands)
Power Consumption
97 watts/331.6BTU (Full loading with PoE function)
Power over Ethernet
PoE Standard
PoE in Port
- IEEE 802.3bt PoE++ Type 4 standard PD
- PoH (Power over HDBASE-T)
- IEEE 802.3at PoE+ end-span/mid-span PD
Per PoE out Port
IEEE 802.3bt PoE++ Type 3 PSE
Backward compatible with IEEE 802.3at PoE+ PSE
PoE Power
PoE in Port
50~57V DC, max. 95 watts
Per PoE out Port
48~55V DC, max. 60 watts
Power Pin Assignment
PoE in Port
1/2 (-), 3/6 (+), 4/5 (+), 7/8 (-) or 1/2 (+), 3/6 (-), 4/5 (+), 7/8 (-)
Per PoE out Port
1/2 (-), 3/6 (+), 4/5 (+), 7/8 (-) or 1/2 (+), 3/6 (-), 4/5 (+), 7/8 (-)
PoE Power Budget
65 watts (max.) @ IEEE 802.3bt PoE++
30 watts (max.) @ IEEE 802.3at PoE+ input
IEEE 802.3af PoE Input not supported
Standards Conformance
Regulatory Compliance
FCC Part 15 Class A
CE
Stability Testing
IEC 60068-2-32 (Free fall)
IEC 60068-2-27 (Shock)
IEC 60068-2-6 (Vibration)
Standards Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Environment
Operating
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage
Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
One Power Source for Multi Powered Devices
Today’s IP surveillance technology makes the remote extension of IP cameras easy and the management of monitoring more effective. With the IPOE-E302, users do not have to change their existing network systems. The extender is an ideal solution for the expansion and extension of the current network infrastructures without having to add any cables and other related components and parts.
The IPOE-E302 industrial 1-port 802.3bt PoE to 2-port 802.3at Gigabit PoE Extender, powered by a PSE over standard RJ45 cable, requires very little installation time and does not require any additional setup or programming. The PoE injector port of the PSE supplies IEEE 802.3bt PoE power to the IPOE-E302 and then the IPOE-E302 transmits the power to 2 powered devices that are IEEE 802.3at/bt PoE standard compliant, meaning any additional power adapter for IP cameras and wireless access points is not necessary.