CL1212E Industrial CopperLink Ultra High-Speed Copper Ethernet Extender 168 Mbps
Available Options
The Patton Copperlink CL1212E Industrial Extended Temperature Ultra High-Speed Copper Ethernet Extender combines data flows from up to 2 network-enabled devices onto a single twisted pair or coax cable, the CopperLink Model CL1212E can deliver IP traffic up to 1.8 miles (3 km) away—well beyond the standard 328-foot (100-meter) Ethernet distance limitation.
With achievable line rates up to 168 Mbps, the CL1212 eliminates the bandwidth constraints commonly experienced with other copper-based transmission technologies. The Model 1212E is engineered to re-use existing infrastructure previously employed in such legacy applications as alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV. Many newer cabling standards are also supported, including Cat 5e, Cat 6 and Cat 7.
A built-in two-port Ethernet switch makes the CopperLink CL1212E ideal for delivering multiple IP information streams over a single cable. At a guardhouse or security kiosk for example, you could aggregate IP data from a laptop and a high-resolution IP video camera for simultaneous transmission over a single Ethernet connection.
NOTES FOR ORDERING:
RJ-45 Line Versions
CL1212E/EUI Industrial Extended Temperature High Speed CopperLink Ethernet Extender; 2 x 10/100BaseTX; RJ45 Line, 100-240VAC
CL1212E/EUI-2PK Industrial Extended Temperature High Speed CopperLink Ethernet Extender Kit (Local and Remote); 2 x 10/100BaseTX; RJ45 Line, 100-240VAC
Terminal Block Line Versions
CL1212E/TB/EUI Industrial Extended Temperature High Speed CopperLink Ethernet Extender; 2 x 10/100BaseTX; Terminal Block Line, 100-240VAC
CL1212E/TB/EUI-2PK Industrial Extended Temperature High Speed CopperLink Ethernet Extender Kit (Local and Remote); 2 x 10/100BaseTX; Terminal Block Line, 100-240VAC
Conformal Coated Versions
CL1212E/CC/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; 2 x 10/100BaseTX; RJ45 Line Connector; Conformal Coated; 100-240VAC
CL1212E/CC/EUI-2PK Indutrial Extended Temperature CopperLink High Speed Auto Rate Extender Kit; 2 x 10/100BaseTX; RJ45 Line Connector; Conformal Coated; 100-240VAC
CL1212E/TB/CC/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; 2 x 10/100BaseTX; Terminal Block Line Connector; Conformal Coated; 100-240VAC
PCB Assembly Only Versions
CL1212E-SKD Ethernet Extender, PCB Sub Assembly, RJ45 Line; 2 x 10/100; No Power Supply
CL1212E/TB-SKD Ethernet Extender, PCB Sub Assembly, Terminal Block Line; 2 x 10/100; No Power Supply
- Ethernet Extension Extend 10/100Base-TX Ethernet well beyond its 328-foot (100-meter) limitation over a single unshielded twisted pair (UTP) or Cat 5e/ Cat 6 or Cat 7 cable.
- Operates Over Twisted Pair Realise fibre-optic speeds without the expense and hassle of installing new cables or line-of-site wireless circuits.
- Plug and Play Set these units up straight out of the box. No configuration is required. Dual auto-sensing 10/100 Ethernet ports support full or half duplex operation.
- Multiple Line Rates Supported Switch-selectable rate mode options optimise rate and reach for the noise environment, wire gauge/type and length.
- Transparent LAN Bridging Bypass network configuration requirements by transparently passing all higher layer protocols—including 802.1Q VLAN frames (tagged and untagged).
- Made in the USA The Patton CopperLink CL1212E is designed by Patton engineers and built in Patton's Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.
CopperLink Line Interface
- RJ-45 (pin 4 = ring; pin 5 = tip)
- Terminal block, 2 position
- BNC 75-ohm Coax
CopperLink Line Modulation
- DMT (Discrete Multi-Tone)
Ethernet Interface (x2)
- 8-position, shielded RJ-45. Auto-sensing 10/100Base-TX with half or full duplex operation.
Protocol
- Transparent to high layer protocols: supports 802.1Q VLAN tagged or untagged frames.
- Transparent to IP Video schemes: fully transparent to such compression schemes as MPEG-4, H.264, and MJPEG.
Target SNR Modes
- 6 dB and 9 dB
Management
- 8-position DIP switch
Monitoring
-6 LEDs display status for the following:
- Pwr (Power)
- Line
- Eth (Ethernet) 0 & Eth 1
- R (Remote)
- L (Local)
Power Supply
- External AC: 100–240 VAC
Compliance
- FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC
Environment
- Extended Temperature: -40 to 85°C
- Extended Humidity: 5 to 85%, condensing
Dimensions
- 30.2 W x 108.7 H x 85.3 D mm
Weight
- 623.7 g
MTBF
- 77,000 hours
Long Range Asymmetrical | ||
Length | Mbps | |
Downstream | Upstream | |
250 (76m) | 67 | 16 |
1000 (305m) | 59 | 16 |
2000 (610m) | 45 | 11 |
3000 (914m) | 31 | 5 |
5000 (1.5km) | 17 | 682 kbps |
10,000 (3km) | 4 | 263 kbps |
High Speed Asymmetrical | ||
Length | Mbps | |
Downstream | Upstream | |
250 (76m) | 168 | 95 |
1000 (305m) | 126 | 54 |
2000 (610m) | 60 | 21 |
3000 (914m) | 42 | 6 |
3500 (1km) | 35 | 1 |
High Speed Symmetrical | ||
Length | Mbps | |
Downstream | Upstream | |
250 (76m) | 121 | 144 |
1000 (305m) | 73 | 103 |
2000 (610m) | 45 | 37 |
3000 (914m) | 30 | 10 |
3500 (1km) | 16 | 4 |
CL1212E/EUI Industrial Extended Temperature High Speed CopperLink Ethernet Extender; 2 x 10/100BaseTX; RJ45 Line, 100-240VAC
* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU
CL1212E/EUI-2PK Industrial Extended Temperature High Speed CopperLink Ethernet Extender Kit (Local and Remote); 2 x 10/100BaseTX; RJ45 Line, 100-240VAC
* Includes Transmitter (Local) and Receiver (Remote) and PSUs
CL1212E/TB/EUI Industrial Extended Temperature High Speed CopperLink Ethernet Extender; 2 x 10/100BaseTX; Terminal Block Line, 100-240VAC
* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU
CL1212E/TB/EUI-2PK Industrial Extended Temperature High Speed CopperLink Ethernet Extender Kit (Local and Remote); 2 x 10/100BaseTX; Terminal Block Line, 100-240VAC
* Includes Transmitter (Local) and Receiver (Remote) and PSUs
CL1212E/CC/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; 2 x 10/100BaseTX; RJ45 Line Connector; Conformal Coated; 100-240VAC
* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU
CL1212E/CC/EUI-2PK Industrial Extended Temperature CopperLink High Speed Auto Rate Extender Kit; 2 x 10/100BaseTX; RJ45 Line Connector; Conformal Coated; 100-240VAC
* Includes Transmitter (Local) and Receiver (Remote) and PSUs
CL1212E/TB/CC/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; 2 x 10/100BaseTX; Terminal Block Line Connector; Conformal Coated; 100-240VAC
* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU
CL1212E-SKD Ethernet Extender, PCB Sub Assembly, RJ45 Line; 2 x 10/100; No Power Supply
CL1212E/TB-SKD Ethernet Extender, PCB Sub Assembly, Terminal Block Line; 2 x 10/100; No Power Supply