Menu
Your Cart

IPOE-175 Industrial IP67 1-Port 60W 802.3bt PoE++ Injector (-40~75 degrees C)

IPOE-175 Industrial IP67 1-Port 60W 802.3bt PoE++ Injector (-40~75 degrees C)
IPOE-175 Industrial IP67 1-Port 60W 802.3bt PoE++ Injector (-40~75 degrees C)
IPOE-175 Industrial IP67 1-Port 60W 802.3bt PoE++ Injector (-40~75 degrees C)
IPOE-175 Industrial IP67 1-Port 60W 802.3bt PoE++ Injector (-40~75 degrees C)
IPOE-175 Industrial IP67 1-Port 60W 802.3bt PoE++ Injector (-40~75 degrees C)
IPOE-175 Industrial IP67 1-Port 60W 802.3bt PoE++ Injector (-40~75 degrees C)
IPOE-175 Industrial IP67 1-Port 60W 802.3bt PoE++ Injector (-40~75 degrees C)
IPOE-175 Industrial IP67 1-Port 60W 802.3bt PoE++ Injector (-40~75 degrees C)
IPOE-175 Industrial IP67 1-Port 60W 802.3bt PoE++ Injector (-40~75 degrees C)
IPOE-175 Industrial IP67 1-Port 60W 802.3bt PoE++ Injector (-40~75 degrees C)
IPOE-175 Industrial IP67 1-Port 60W 802.3bt PoE++ Injector (-40~75 degrees C)

The Planet IPOE-175 Industrial IP67-rated Single-port 802.3bt PoE ++ Injector provides a maximum of up to 60 watts PoE output, transmitting both the Gigabit Ethernet data and 802.3bt PoE power over the UTP cable. It is specifically designed for powered devices (PDs)  such as PTZ network cameras, PTZ speed dome cameras, color touch-screen voice over IP (VoIP) telephones, multi-channel (11a/b/g/n) wireless LAN access points and other network devices that need a higher power to work stably.

]


Weather-proof RJ45 Ethernet Connector and Shielded Plug

The IPOE-175 is ideal for installing an extended range of outdoor PoE devices such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor PoE IP intercoms and many more. The IPOE-175 is equipped with 3 waterproof cable glands for direct-attach applications. Assembled with waterproof cable glands, it can make the general RJ45 connector weather-proof and provides tight and strong connection. Moreover, it comes with the industrial protection rating of IP67 capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold.


Environmentally-hardened Design

With Industrial-level IP67-rated aluminum case, the IPOE-175 provides a high level of immunity against electromagnetic interference, and is able to protect itself from dust and water ingress and to operate under the temperature range from -40 to 75 degrees C. All these features ensure the highest level of reliability for mission-critical applications in any difficult environment.

Convenient and Reliable Power System 

To facilitate the 802.3bt PoE++ usage with commonly used 24~56V DC power input for transportation and industrial-level applications, the IPOE-175 adopts 24~56V DC to 55V power boost technology to solve power source issue but does not require special power supplies. Its wide-ranging voltages design is suitable for worldwide operability with high availability applications requiring dual or backup power inputs.



Robust Protection

The IPOE-175 provides ±8KV DC for Ethernet ESD protection and ±6KV surge immunity to improve product stability and protect users' networks, making sure the flow of operation does not fluctuate.


Making Networks Easier and More Reliable

The IPOE-175 can deliver 60-watt 55V DC power over Cat.5/5e/6 Ethernet cables which allow data and power to transmit simultaneously through the cable between the Injector (IPOE-175) and PoE PD or PoE++ Splitter (IPOE-175S). The maximum distance between the Injector and Splitter is 100 meters. As the IPOE-175 is also backward compatible with IEEE 802.3at PoE+ PD or PoE Splitter, the system administrator only has to use one single RJ45 Ethernet cable to carry both power and data to another device. It would make the network deployment easier and more reliable.



Physical Port


- Two 10/100/1000BASE-T Gigabit RJ45 ports

     - 1-port Data + Power output

     - 1-port Data input

- One 2-pin terminal block for power input. (Power Range: 24 ~ 56V DC) 

 

Power over Ethernet


- 1-port data + power output

Complies with IEEE 802.3bt Power over Ethernet plus plus PSE

Compatible with IEEE 802.3at PoE+ powered devices 

Provides DC 55V power over RJ45 Ethernet cable to device with Ethernet port

Supports total PoE budget up to 60 watts for PoE output port

Auto detects powered device (PD)

Remote power feeding up to 100m

 

Industrial Case and Installation


- IP67-rated aluminum case 

- LED indicators for power LED and PoE-in-use

- Wall-mount design

- Supports 6KV DC Ethernet ESD protection

-   -40 to 75 degrees C operating temperature

- Plug and Play installation

 

Hardware Specifications

Interface

[Input Port]

1 x 10/100/1000BASE-T “Data” in RJ45 port

[Output Port]

1 x 10/100/1000BASE-T Ethernet with IEEE 802.3bt PoE+

“Data + DC” out RJ45 port

[Input Power Terminal Block]

1 x 2-pin terminal block

- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)

Data Rate

10/100/1000Mbps

LED Indicators

PWR (Green)

PoE-in-use x 1 (Amber)

Input Voltage

24~56V DC

Power Consumption

Voltage System on Full Load (Max.)

DC 24V 1.2W 72W

DC 36V 1.44W 70.56W

DC 54V 1.71W 65.8W

DC 56V 2.24W 62.1W

ESD Protection

Air 8KV DC

Contact 6KV DC

Surge Protection

6KV

Enclosure

IP67-rated and IK10 aluminum metal case

Installation

Wall-mount ear

Dimensions (W x D x H)

150 x 43.8 x 72.94 mm

169.85 x 43.8 x 72.94 mm, with cable gland

Weight

339g

373g (with three waterproof cable glands)

MTBF

>100,000 hours

Network Cable

10BASE-T: UTP category 3, 5 cable (≤100m)

100BASE-TX: UTP category 5,5e cable (≤100m)

1000BASE-T: UTP category 5e,6 cable(≤100m)


Power over Ethernet

PoE Standard

IEEE 802.3bt PoE++ type 3 PSE

Backward compatible with IEEE 802.3at PoE+

PoE Power Supply Type

802.3bt/PoH (Power over HDBaseT)

End-span/Mid-span

PoE Power Output

55V DC

Max. 60 watts to 802.3bt PoE++ PD

Max. 60 watts to PoH PD

Max. 30 watts to 802.3at PoE+ PD

Power Pin Assignment

802.3bt/PoH: 1/2 (-), 3/6 (+), 4/5 (+), 7/8 (-)

End-span: 1/2 (-), 3/6 (+)

Mid-span: 4/5 (+), 7/8 (-)


Standards Conformance

Regulatory Compliance

FCC Part 15 Class A

CE

Stability Testing

IEC 60068-2-32 (Free fall)

IEC 60068-2-27 (Shock)

IEC 60068-2-6 (Vibration)

Standard Conformances

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit Ethernet

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3bt Power over Ethernet Plus Plus


Environment

Operating Temperature

-40 ~ 75 degrees C

Storage Temperature

-40 ~ 85 degrees C

Humidity

5 ~ 95% (non-condensing)

Connecting to IEEE 802.3bt Compliant Powered Devices

Meeting the IEEE 802.3bt PoE++ standard, the IPOE-175 can directly connect and inject power via RJ45 Ethernet cable to any IEEE 802.3bt end-nodes like PTZ network cameras, PTZ speed dome cameras, color touch-screen VoIP telephones, multi-channel wireless LAN access points and other network devices.


IEEE 802.3bt Injector and Splitter Installation


For a place which is hard to find the power inlet, the IPOE-175 and IPOE-175S can operate as a pair to provide the easiest way to power the above-mentioned Ethernet devices that need high power consumption for any applications designed for large industries, enterprises and communities.



Tags: ipoe175