CL1214 CopperLink Ultra High Speed Multi-Port Copper Ethernet Extender -168 Mbps

- Ethernet Extension—Extend 10/100Base-TX Ethernet up 3 kilometers well beyond 100-meter limitation—over a single twisted-pair, Cat 5e/6/7, or even coaxial cable.

- Operates Over Twisted Pair—Realise fibre-optic speeds without the expense and hassle of installing new cables or line-of-site wireless circuits. 

- Plug and Play—Set these units up straight out of the box. No configuration is required. Auto-sensing 10/100 Ethernet ports support full or half duplex operation. 

- Multiple Line Rates Supported—Boasting downstream line rates up to 168 Mbps, the switch-selectable rate mode options optimize rate and reach for the noise environment, wire gauge/type and length. 

- Transparent LAN Bridging—Bypass network configuration requirements by transparently passing all higher layer protocols—including 802.1Q VLAN frames (tagged and untagged). Data-transmission mechanism is fully transparent to such IP video compression schemes as MPEG-4, H.264 and MJPEG.

- Made in the USA — The Patton CopperLink CL1214 is designed by Patton engineers and built in their Gaithersburg, Maryland facility in the USA. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.

CopperLink Line Interface

- RJ-45 (pin 4 = ring; pin 5 = tip)

- BNC 75 Ω coax

- Terminal block, 2 position

CopperLink Line Modulation

- DMT (Discrete Multi-Tone) 

Ethernet Interface (x4)

- 8-Position, shielded RJ-45. Auto-sensing 10/100Base-TX with half or full duplex operation. 

Protocol

- Transparent to high layer protocols: supports 802.1Q VLAN tagged or untagged frames.

- Transparent to IP Video schemes: fully transparent to such compression schemes as MPEG-4, H.264, and MJPEG.

Impulse Noise Protection Modes

- Selectable fast and interleave modes 

Target SNR Modes

- 6 dB and 9 dB 

Management

- 8-position DIP switch 

Monitoring

- 8 LEDs display Power, Link, Ethernet 1–4, Remote, and Local status. 

Power Supply

- External AC: 100–240 VAC 

Compliance

- FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC 

Environment

- Temperature: 0 to 50°C

- Humidity: 5 to 95%, non-condensing

- Extended Temperature: -40 to 85°C ( CL1214E/CC)

- Extended Humidity: 5 to 85%, condensing (CL1214E/CC)

Dimensions

15.74 (W) x 3.18 (H) x 12.07 (L)  cm

Weight

181 g

Data Rates and Reach

Workgroup Ethernet Extension Application

 A built-in 4-port Ethernet switch makes the CopperLink Model 1214 ideal for delivering multiple IP information streams over a single cable. For example, at a guardhouse or security kiosk, you could aggregate IP data from a laptop, a motion sensor, and two Hi-Res IP video cameras for simultaneous transmission over a single Ethernet connection. 

 Combining data flows from up to four network-enabled devices onto a single twisted pair or coax cable, the CL1214 can deliver IP traffic up to 1295m away—well beyond the 100-meter Ethernet distance limitation. 

 With achievable line rates up to 100 Mbps, the CopperLink 1214 eliminates the bandwidth constraints commonly experienced with other copper-based transmission technologies. The Model 1214 is engineered to re-use existing infrastructure previously employed in legacy applications including alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV. Many newer cabling standards are also supported, including Cat 5e, Cat 6 and Cat 7. 

RJ45 Line

CL1214/EUI High Speed CopperLink Ethernet Extender; RJ45 Line, 100-240VAC

* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU

CL1214/EUI-2PK High Speed CopperLink Ethernet Extender Kit (Local and Remote); RJ45 Line, 100-240VAC

* Includes Transmitter (Local) and Receiver (Remote) and PSUs

Terminal Block (TB) Line

CL1214/TB/EUI High Speed CopperLink Ethernet Extender; Terminal Block Line, 100-240VAC 

* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU

CL1214/TB/EUI-2PK High Speed CopperLink Ethernet Extender Kit (Local and Remote); Terminal Block Line, 100-240VAC 

* Includes Transmitter (Local) and Receiver (Remote) and PSUs

BNC Coax Line

CL1214/BNC/EUI High Speed CopperLink Ethernet Extender; BNC Line, 100-240VAC

* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU

CL1214/BNC/EUI-2PK High Speed CopperLink Ethernet Extender Kit (Local and Remote); BNC Line, 100-240VAC 

* Includes Transmitter (Local) and Receiver (Remote) and PSUs

Inc. POTS Port

CL1214/S/EUI-2PK High Speed CopperLink Ethernet Extender Kit (Local and Remote); RJ45 Line; POTS Port; 100-240VAC 

* Includes Transmitter (Local) and Receiver (Remote) and PSUs

CL1214/TB/S/EUI-2PK High Speed CopperLink Ethernet Extender Kit (Local and Remote); Terminal Block Line, POTS Port; 100-240VAC 

* Includes Transmitter (Local) and Receiver (Remote) and PSUs