NV-500 - Industrial VDSL2 LAN extender

Overview

The NV-500 is our industrial LAN extension solution using the G.993.2 VDSL2 standard technology and providing up to 100Mbps symmetric put using only a single copper wire pair that provides stable and reliable Ethernet transmission. Housed in metal DIN rail enclosures, these extenders are designed for harsh environments, such as industrial networking, intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications. Wide operating temperature range models (-20 to 70°C) fulfill the special needs of industrial automation applications.

Flexible Configuration

The NV-500 supports both central office (CO) and customer-premises equipment (CPE) modes selectable through DIP Switch. Customers can do the configuration for different needs adjustment. PIN1 ON of DIP Switch is CO side, PIN1 OFF of DIP Switch is CPE side

Interleave delay support

Interleave delay function is used in digital data transmission technology to protect the transmission against noise issue and data error.
If during transit more than a certain amount of data has been lost then the data cannot be correctly decoded. Short bursts of noise on the line can cause these data packets to become corrupt and the bridge has to re-request data which in turn can slow down the overall rate at which data is transmitted.
Interleaving is a method of taking data packets, chopping them up into smaller bits and then rearranging them so that
once contiguous data is now spaced further apart into a non continuous stream. Data packets are re-assembled by your lan extender.

Easy Installation

The NV-500 may be installed on any level surface (e.g. a table or shelf or rail) that use bracket or DIN rail plate. NV-500 supports plug-and-play installation and is fully compatible with all kinds of network protocols. Furthermore, user can watch the status of each individual port via the LED indicators.

Automatic Bandwidth detection

The NV-500 supports band profile 17a and 30a, it can automatically detect the cable length and bandwidth depending on the distance to the configuration. The maximum bandwidth is symmetric bandwidth of 100Mbps / 0.3 km.

About harsh environment applications

The NV-600AI can used in the harsh environment, such as -20°C ~ 70°C (-4°F ~ 158°F), and metal case compliant with the IP-30 design. The design of the IP-30 can prevent the invasion of small stones within the NV-600AI.

 Features

Applications

LAN Distance Extension Two NV-500 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect the maximum data rate of 100Mbps and up to 3km distance support. It is easy-to-use which do not requires installation of additional wiring. Every modular phone jack in the building can become a port on the LAN.

Specifications