NM-102Kit - Media Converter Series
Overview
The Netsys NM-102 KIT including NM-102 A20 (Master) & NM-102 B20 (Slave) is a converter that translates transmission signals from a twisted-pair 100BASE-TX cable to 100BASE-FX fiber optic cable(UTP).
The converter automatically adapts to the highest level of performance supported by the device connected to the ETHERNET port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the device connected is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. In fiber-optic interface, the port of converter operates at 1310 nm and use WDM connector. Single-mode model that supports distance up to 20-km is available.
Features
• Support auto-MDIX and 10/100Base T for RJ-45 port |
• Complies with IEEE 802.3 for 10BaseT/802.3u for 100Base-TX and 100Base-FX. |
• Supports WDM duple mode for TX/RX on single fiber cable |
• Compact in size, easy installation |
• Data Transfer Rate: 100Mbps |
• Duplex mode support: Full or half-duplex mode by Auto-Negotiation |
• LED indicators: PWR, LNK/ACT, SPD, FDX for copper RJ-45 LINK/ACT, FDX for Fiber optic. |
• Fiber: Single Mode: 8.3/125, 8.7/125, 9/125µm optic fiber and up to 20km |
• EMI certified by CE, FCC |
• External Power Adapter:Input:AC 85~240 volts/50~60Hz.Output:DC 5V/1A |
Specifications
| ||||||||||||||||||||||||||||
|