VC-232G 10/100/1000T Ethernet over VDSL2 Coaxial Converter

ITU-T G.993.5 G.Vectoring and G.INP

- Upstream/Downstream bandwidth up to 200/100Mbps

- CO/CPE mode selectable via DIP switch

- Selectable target band plan and SNR margin

- Half duplex back pressure and IEEE 802.3x full duplex pause frame flow control

- One BNC connector for VDSL connection

- Uses existing RG59/RG6 coaxial cable

- Used in pairs to extend Point-to-Point connection up to 1.4km

- Supports a packet size of up to 1522 bytes, IEEE 802.1Q VLAN tag transparency

- Advantage of minimum installation time (Simply by Plug-and-Play)

- Supports extensive LED indicators for network diagnosis

- Compatible with Planet Media Converter Chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48)

- Compact in size and easy to install

- Desktop, Wall-mount and Din-Rail Mount (RKE-DIN Sold Separately)

Hardware Specifications

TP interface

1 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

VDSL Interface

1 x BNC female Ethernet over Coaxial

Cabling

Coaxial cable: 75 ohm

RG-6/U cable, less than12Ω/1000 ft

RG-59/U cable, less than 30Ω/1000 ft.

Maximum Distance

Max. 1400m with data transmission (4,593ft.)

Functionality

DIP-1: Select CO or CPE mode

DIP-2: Select G.INP or Interleaved mode

DIP-3: Select Band Profile (Asymmetric or Symmetric)

DIP-4: Select SNR of 12dB or 8dB

Dimensions (W x D x H)

70 x 97 x 26 mm

Weight

185g

Power Requirement

DC 5V, 2A external power (Included)

LED Indicators

Power: Green

1000BASE-T LNK/ACT: Green

VDSL: Green

CO: Green

CPE: Green

Housing

Metal

Switch Specifications

Switch Processing Scheme

Store-and-Forward

Address Table

2K entries

Flow Control

Back pressure for half duplex

IEEE 802.3x pause frame for full duplex

System Specifications

VDSL Compliance

VDSL-DMT

　ITU-T G.993.1 VDSL

　ITU-T G.993.1 VDSL

　ITU-T G.997.1

　ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)

　ITU-T G.993.5 G. Vectoring

　ITU-T G.998

　G.INP

Standards Compliance

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3x Full-duplex flow control

IEEE 802.1p Class of Service

ITU-T G.993.1 VDSL

ITU-T G.997.1

ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)

ITU-T G.993.5 G.Vectoring and G.INP

ITU-T G.998

Regulatory Compliance

FCC Part 15 Class A, CE

Environment

Temperature

Operating: 0~50 degrees C

Storage: -10~70 degrees C

Humidity

Operating: 5~95% (non-condensing)

Storage: 5~95% (non-condensing)

Performance

Coaxial Performance

Interleave(Upstream/Downstream: Mbps)

　Asymmetric (8dB):

　200m ->88Mbps/168Mbps

　400m ->75Mbps/160Mbps

　600m ->59Mbps/129Mbps

　800m ->32Mbps/110Mbps

　Asymmetric (12dB):

　200m ->78Mbps/145Mbps

　400m ->69Mbps/137Mbps

　600m ->48Mbps/118Mbps

　800m ->26Mbps/94Mbps

　Symmetric (8dB):

　200m ->129Mbps/131Mbps

　400m ->117Mbps/122Mbps

　600m ->101Mbps/92Mbps

　800m ->62Mbps/73Mbps

　Symmetric (12dB):

　200m ->117Mbps/123Mbps

　400m ->102Mbps/102Mbps

　600m ->88Mbps/82Mbps

　800m ->47Mbps/56Mbps

G.INP(Upstream/Downstream: Mbps)

　Asymmetric (8dB):

　200m ->95Mbps/200Mbps

　400m ->82Mbps/175Mbps

　600m ->59Mbps/151Mbps

　800m ->37Mbps/122Mbps

　Asymmetric (12dB):

　200m ->89Mbps/181Mbps

　400m ->71Mbps/156Mbps

　600m ->46Mbps/136Mbps

　800m ->30Mbps/102Mbps

　Symmetric (8dB):

　200m ->147Mbps/147Mbps

　400m ->132Mbps/135Mbps

　600m ->108Mbps/104Mbps

　800m ->76Mbps/78Mbps

　Symmetric (12dB):

　200m ->138Mbps/143Mbps

　400m ->116Mbps/120Mbps

　600m ->91Mbps/89Mbps

　800m ->58Mbps/60Mbps

Note: As there are various resistance values in the category of RG-59/U or RG-6/U cable, the actual data rate will vary on the quality of the copper wire and environmental factors.

Point-to-Point Application -- LAN to LAN Connection

One pair of  VC-232G could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one VC-232G must be Master (CO mode) and the other one is Remote (CPE mode).

Community/Campus Surveillance and Security over IP

To take advantage of digital surveillance system and keep the benefits of coaxial cable, the VC-232G helps the community, campus and enterprises to upgrade analog camera system to IP camera surveillance without using additional new wires. The VC-232G is a switching architecture with one RJ45 port and one BNC Ethernet over Coaxial port. Just plug in the UTP cable of IP camera to Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.